Table of Contents
Advertisement
Control panel view and functions
DISPLAY
SCREEN
SETTING
BUTTON
Time / Temperature Control
1. In standby mode, press
should cause the LEDs to flash, then set the desired temperature with the
arrows.
2. To set the time, press
and
arrows to set the unit to the desired time.
• To switch between Celsius and Fahrenheit, hold both the
3. Press
• If
is pressed and no selection has been made, the mode will be exited after the
LEDs flash 10 times.
• A long press of
Start / Stop
1. After setting the desired temperature and time, press
2. Press
DECREASE
1 . 1 1 0 x 9 0 m m , R = 3 . 7 5
3 .颜 色:黑+白
4 .数 码 管 窗 口 透 明 黑
to switch temperature or time setting. Press once, which
5 .表 面M T 1 1 0 1 0，
按 键 与
6 .
again, which will cause the LEDs to flash again. Now use the
one time to confirm the settings you have chosen.
will display the set time and temperature in turns.
again to stop the machine and return to standby mode.
INCREASE
按 键 平 凸 。
C
F
作 透 明 白 处 理.
ON/OFF BUTTON
and
and
arrows.
to start the machine.
5.
Advertisement
Table of Contents
