Advertisement
Quick Links
Advertisement
Summary of Contents for AutoAqua Smart AWC Duo
- Page 1 Change for Simple Smart AWC Duo SAWC-400P...
- Page 2 List of Parts (Can Be Purchased Separately) Description Item Picture 1. Controller with touch panel & two Dual Sensors Smart AWC Duo 2. Max. Mounting Thickness : Controller x1 1/2 inch (12.7 mm) Universal Power Supply : Universal Power 100-240 VAC...
- Page 3 Change for Simple Controller & Dual Sensors Smart AWC Duo Controller : High Level Dual Sensor : Low Level Dual Sensor : Power DC Jack : ATO Filling Pump/ Freshwater AWC Filling Pump Jack : AWC Drain Pump Jack : Saltwater AWC Filling Pump Jack...
- Page 4 Change for Simple Installation 1. AWC (Auto Water Change) i. Saltwater Aquarium Step 1 : Mount the blue sensor Step 2 : ( ) at normal water level Mount the green sensor – ATO water level (with ( ) at low water level WaterChangeVolume the lower sensor (with the top sensor...
- Page 5 Change for Simple Power Step 7 : Step 6 : Connect power adapter. Connect AWC lling pump to P3. Step 5 : Connect AWC lling tube ( pump siphon break tubing holder). AWCDrainPump AWCFillingPump WasteWater WasteWaterContainer NewWaterReservoir Tank/Sump ii. Freshwater Aquarium For Freshwater aquariums, P3 is not required.
- Page 6 Change for Simple Arrow on siphon break indicates water ow direction. Step 3 : Step 4 : Connect AWC lling Connect AWC lling tube ( pump siphon pump to P1. break* tubing holder). AWC F illingPump NewWaterReservoir Tank/Sump *Note : Place siphon break inside the tank/sump but above the water level.
- Page 7 Change for Simple 2. ATO (Auto Top Off) In freshwater mode, ATO operates with pump 1. Step 1 : Mount the blue sensor ( ) at normal water level (with the lower sensor indicating the water level) on the tank/sump with the magnet.* Tank/Sump...
- Page 8 Change for Simple Power Step 4 : Connect power adapter. ATOFillingPump Tank/Sump ATOReservoir *The DC pumps can be replaced with larger AC pumps with AUTOAQUA Smart AC Switch OpticalLevelSensor ACFillingPump Tank/Sump Reservoir Power ACSwitch...
- Page 9 Change for Simple Calculating the Water Change Volume The volume can be calculated by multiplying the width and length of your tank and the distance between the pyramids of the two sensors.* For example, a tank is 18 inches in length and 17 inches in width. If the distance between the two sensors is 3 inches, the water change volume is approximately 4 gallons.
- Page 10 Change for Simple Icons & Buttons for Setting Turn ATO on or off Choose AWC MANUAL / AUTO mode or turn AWC off 1. Start / pause / resume the AWC process 2. Dismiss alarm Choose the setting item in the AWC MANUAL / AUTO mode 1.
- Page 11 Change for Simple Display Indication Item Display : ATO is on. : ATO is off. : AWC is off. : AWC is in MANUAL mode. : AWC is in AUTO mode. Aquarium : Saltwater mode Setting Mode : Freshwater mode shows : Pump is connected and off.
- Page 12 4). Touch to start the water change. 2. AWC AUTO Mode (Periodic AWC) In this mode, Smart AWC Duo will do water changes periodically. 1). Touch until the screen shows 2). Touch and the “D” will ash. Touch to set the date.
- Page 13 Change for Simple Alarm and Reminder Action Status Description 1. ATO pump is not connected. 1. Connect the pump cable. ashes with 2. ATO pump malfunctions. 2. Replace the pump. the audible alert 1. Touch to dismiss the alarm. Quick Security Technology 2.
- Page 14 Change for Simple Quick Security Technology (QST) Smart AWC Duo uses QST for real-time protection against any failure situation.* QST can detect the malfunction of the sensor, the controller, and the empty reservoir to avoid the pump running dry. The controller will give an audible and visual alert when any one of the following situations occurs.
- Page 15 * Since the timer is not running during a power outage, the next water change process will be delayed. For example, a power outage occurs when the display shows 00:08. After Smart AWC Duo is powered on again, the countdown will start from 00:08. Specifications 1.
- Page 16 Change for Simple Limited Warranty 1. Limited warranty is provided by AUTOAQUA only if your AUTOAQUA Product ("Product") was purchased from an authorized distributor or an authorized reseller. 2. All warranty repairs or replacement are performed by the authorized distributor or authorized reseller in the region where the Product was rst shipped by AUTOAQUA.
Need help?
Do you have a question about the Smart AWC Duo and is the answer not in the manual?
Questions and answers