Cleveland AFF-950-EC Specifications

™
Cleveland
COOK CHILL SYSTEMS
CONVEYOR
FOR USE WITH CYCLE-MATIC VERTICAL
FORM-FILL-SEAL MACHINE
Cleveland Standard Features
I Electrically powered belt conveyor with quick discon-
nects for the Air and Electrical hookups for use with
the Cycle-Matic Form-Fill-Seal Machine
I Air operated raise and lower, loading end of conveyor
for various pouch lengths
I No additional Air or Electric required if used with
Cycle-Matic Form-Fill-Seal Machine
I All stainless steel construction
I Frame mounted on (4) 3" diameter lockable swivel
casters
I 18" wide USDA approved polypropylene belt with rub-
ber inserts
I 1/3 Horse power TEFC motor with drive gearbox
I Variable belt speed controlled from Cycle-Matic Form-
Fill-Seal Machine touch screen
I Conveyor can operate in either Constant Run or Timed
Run
I Operator start/stop controlled from Cycle-Matic Form-
Fill-Seal Machine touch screen
I Emergency stop at Cycle-Matic Form-Fill-Seal Machine
control panel
I Accepted for use in U.S.D.A. Inspected Facilities
1333 East 179 St.,
Cleveland, Ohio, U.S.A. 44110
Tel: 1-216-481-4900 Web Site: www.ClevelandRange.com
Fax: 1-216-481-3782 Email: Steam@ClevelandRange.com
Cook/Chill Systems
MODEL: AFF-950-EC
Short Form Specifications
Shall be CLEVELAND Model AFF-950-EC EXITING CONVEYOR
with; Air operated raise and lower, loading end of conveyor for
various bag lengths; All stainless steel construction; Frame
mounted on (4) 3" diameter lockable swivel casters; 18" wide
USDA approved polypropylene belt with rubber inserts; 1/3
Horse power TEFC motor with drive gearbox; Variable belt
speed and Operator start/stop controlled from Cycle-Matic
Form-Fill-Seal Machine touch screen; Conveyor can operate in
either Constant Run or Timed Run; Emergency stop at Cycle-
Matic Form-Fill-Seal Machine control panel.
Project ________________________________
Item __________________________________
Quantity _______________________________
FCSI Section ____________________________
Approval _______________________________
Date __________________________________
XIV 31
SECT. PAGE
0707