Advertisement
Installation, Operation & Maintenance
3. Lock using a padlock hasp, if required.
OPEN
Rotate latch handle
open the cover. Using the
2
grab handle,
fully open until hold-open
3
arm locks.
CLOSE
Pull red handle to
disengage hold open
3
arm.
Descend the
ladder. Grasp the
grab handle to slam
2
the door shut.
FALL PROTECTION
Add an optional Safety Railing
for an OSHA compliant solution.
For complete Installation, Operation and
Maintenance, please visit manufacturer's website
MAINTENANCE
o Roof hatches should be manually operated once a year to check performance.
o Lubricate moving parts such as hinges and latches with a silicone spray lube as required to
maintain a smooth opening and closing of the door. Do not use regular lubricating oil as it
can attract dust and grit.
o Non-moving parts can be cleaned with a mild soap or dishwashing detergent and water
solution.
o Gaskets can be cleaned with a clean, damp, lint-free cloth. Do not apply mineral oils, vinyl
dressings, or other lubricants to the gasket as they can cause the gasket to break down over
time.
QUESTIONS?
For more information on installation, repair or replacement, please visit
www.BabcockDavis.com
Grab handle may be
1
silver and located
to
in corner of cover
depending on unit
1
push cover
2
3
Made in the
U.S.A.
or call 888.412.3726.
BD_RH_BU_IOM.pdf
Personnel II Roof Hatch
Model(s): BRHU/BA3630/BA3636/BA4848/
BA3054/BG3630/BG3636/BG4848/BG3054
©2020 Babcock-Davis
Rev Dec 20
3
Advertisement
