Miller Electric Mig Runner 195 445 Owner's Manual page 3

3. Installing Power Source/Wire Feeder
2
3
.
For hooking up power source,
wire feeder, welding guns,
and accessories see Owner's
Manual for individual unit.
2
4
3
1
.
The bottom shelf of the
MIG Runner cart is de-
signed to fit the Cool-
mate 3 water cooler.
!
Make sure all components are
securely fastened to the cart
before moving.
1 Power Source
Mount the power source to the cart
as shown using the 4 supplied
1/4-20 screws.
.
The power source may or may
not be already mounted in the Mig
Runner Cart
2 Wire Feeders
3 Stand Off Supports
Install the stand off supports to the top
of the cart (use 3 stand off supports for
the 22A feeder, use 4 stand off sup-
ports for the S-74D feeder) as shown
using the supplied 10-24 screws. At-
tach the feeder to the stand off sup-
ports using the supplied 10-24
screws.
4 XR-Control
Remove existing (4 pcs) 1/4-20 skid
mounting screws. Attach XR-Control
to cart with supplied (4 pcs) 1/4-20X1
screws.
803 115-B / 803 116−C
OM-207 132 Page 3