Wish you hours of happy with the MS-series Monitor Speaker. Our MIDIPLUS dedicate ourself to making the MS-Series Monitor Speaker more professional,more accurate and more convenient.MS-Series don’t have the mixing effect,so what you hear is what you want.
The power jack and power switcher are below the rear panel.Power on the device,the MIDIPLUS LOGO will be lighting on the front panel. There is fuse(250V/3A) in the power jack to protect the Monitor from overload or fault condition.
● Check the signal source is turned up to a level that can properly send a signal to the Monitors. ● Check to see if one of the monitor is working well,Exchange the audio input cable from the non-working monitor to the working one.This will determine whether it’s really the monitor,a fault cable or some other glitch in the audio chain.
Page 6
MS5: ● Amplifier: low noise, Class AB amplifier ● XLR balanced, 1/4” TRS balanced, RCA unbalanced inputs ● Power: 50W ● Frequency respond(±3dB): 46Hz-20KHz ● AC power input:(Selected)AC 110v/60Hz AC220V/50Hz ● Dimension: 300*240*190mm ● Weight: 5Kg MS6: ● Amplifier:low noise, Class AB amplifier ●...
Need help?
Do you have a question about the MS Series and is the answer not in the manual?
Questions and answers