Installing The Sm-Cb90 - Shimano Non Series Dealer's Manual

Installation/removal

Installing the SM-CB90

NOTICE
• Make sure that the inner end is firmly fit into the cable hook.
2.
Temporarily secure the outer casing to the handlebar (by using tape or
a similar material).
Installing the SM-CB90
WARNING
• The cable adjustment nut and quick release lever are not provided with the BR-
RS811-R; be sure to use the SM-CB90 (cable adjuster). When the brake shoes are worn
down, it becomes impossible to adjust the shoe clearance by hand. Also confirm that
the SM-CB90 is in the "Close" position before riding the bicycle.
NOTICE
• Be sure to install the SM-CB90 so that it does not contact the frame when the
handlebars are turned.
Inner end
Cable hook
Tape
Outer casing
19