Voltage Selector; Microphone Input - Karma TIGER 8A Instruction Manual

Amplified speaker with mp3
Hide thumbs Also See for TIGER 8A:
Table of Contents

Advertisement

12. SELETTORE DI VOLTAGGIO
Utilizzatelo per selezionare il corretto voltaggio
di ingresso
(solo per TIGER 12A e 15A)
13. LINE OUT
Vi permetterà di collegare dispositivi di
amplificazione. Il segnale proveniente
da questa presa è di tipo pre-amplificato.
(connettore XLR per TIGER 12A e 15A; presa
jack 6,3mm mono per TIGER 10A)
14. LINE IN
Tramite queste prese potrete collegare
dispositivi di linea esterni (Lettori CD, PC...)
(RCA + XLR per TIGER 8A e 10A )
(RCA + XLR + Jack 3,5mm ST per TIGER
12A e 15A)
15. INGRESSO MICROFONICO
Permette di collegare un microfono a filo
dinamico o radiomicrofono con connettore XLR
o Jack 6,3mm mono
16. LED POWER
Si accende per indicare la corretta
alimentazione dell'apparecchio
17. LED CLIP
Questo led indica una sorgente dal
livello particolarmente alto. In questo
caso suggeriamo di abbassare il livello
agendo sul volume dell'ingresso utilizzato.
Un lampeggio occasionale è accettabile.
Se rimane acceso in modo fisso c'è la
possibilità di danneggiare irrimediabilmente il
diffusore.
10

12. VOLTAGE SELECTOR

Use it to select the correct input voltage (only
for TIGER 12A and 15A)
13. LINE OUT
It will allow you to connect amplification
devices. The signal coming from this socket is
a pre-amplified one (XLR connector for TIGER
12A and 15A; jack 6,3 mm mono socket for
TIGER 10A)
14. LINE IN
Through these sockets you can connect
external line devices (such as CD players,
PCs). (RCA + XLR for TIGER8A and 10A)
(RCA + XLR+ jack 3,5mm ST for TIGER 12A
and 15A)

15. MICROPHONE INPUT

You can connect here a wired dynamic
microphone or a wireless microphone with XLR
or jack 6,3 mm mono connector.
16. POWER LED
It lights on to indicate the fixture's correct
powering
17. CLIP LED
This led indicates that the level of a source is
too high. In this case we suggest to reduce
immediately the level, adjusting the volume of
the input you are using.
If the led flashes occasionally this is
acceptable, but if it remains permanently on
there is the risk to damage definitively the
speaker.

Advertisement

Table of Contents
loading

Table of Contents