Tycon Power Systems RPDC-12 Series Quick Start Manual

Wireless Base Stations
▫
and Client Devices
Surveillance Cameras
▫
Remote Sensors
▫
Remote Lighting
▫
Off Grid Electronics
▫
Congratulations! on your purchase of the RemotePro™ off-grid
remote power system. Please take a moment to review this Qwik
Install Guide before assembly or battery installation.
DANGER! Avoid Powerlines!
When following the instructions in this guide take extreme care to avoid
contact with overhead power lines, lights and power circuits. Contact
with power lines, lights or power circuits may be fatal. We recommend
to install no closer than 20 feet to any power lines.
Safety:
For your own protection, follow these safety rules.
▫ Perform as many functions as possible on the ground
▫ Do not attempt to install on a rainy, windy or snowy day or if
there is ice or snow accumulation at the install site or if the
site is wet.
▫ Make sure there are no people, pets, etc. below when you are
working on a roof or ladder.
Recommended Tools: Phillips Screwdriver, 3mm Allen Wrench,
8mm and 14mm Open End Wrench
Please help preserve the environment and return
used batteries to an authorized depot
RPDC-12xx
RemotePro™ Re-
mote Power System
You Can Be Killed!