Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Mora FM Mattson Tronic WMS
- Page 1 Dongel, Tronic WMS Drift- och monteringsanvisning • Drifts- og installasjonsanvisning • Drifts- og monteringsvejledning Asennus- ja huolto-ohje • Installation and maintenance instruction • Betriebs- und Installationsanleitung Installatie- en onderhoudsgids • Installation et notice de montage...
- Page 2 Tronic WMS dongle With the “Tronic WMS Configurator” you can: • Read and change parameters • Set maximum temperature (hot water limitation) • Initiate hot water flushing • Take notes • View and save signal strengths System Requirements • Recommended Windows 10 (PC) •...
- Page 3 Radiocommunication Mixers default ID Battery/Main status Service mode Mixer type Battery level Updated Signal strength Number of activations 3. Click on the mixer image. 4. Enter a unique name for the mixer and press "Change" 5. You can also save a note attached to the mixer and press "Add" 6.
- Page 4 Set parameter 1. Click "Set parameter" 2. The image below is shown, here you can choose which mixer to program by clicking on it once, marked with a black line on the left side. Presets 1. Click on the desired value, the default value is shown above each group. 2.
- Page 5 Service Not used Hot water flush 1. Click on "Hot Water Flush" 2. Select mixer to be flushed, marked with a black line on the left side. Press "Next" 3. Adjust the mixer valve/thermostat for hot water flushing according to the mixer instruction, if the instruction is missing, it is available at www.fmmattsson.se www.moraarmatur.se...
Need help?
Do you have a question about the FM Mattson Tronic WMS and is the answer not in the manual?
Questions and answers