Page 1
R.R. BRAMLEY & CO. LTD. ESTABLISHED 1921 184 Marua Road, Mt Wellington (PO Box 14-114, Panmure) Auckland Phone: (09) 579 2036 Fax: (09) 525 0735 Email: sales@bramley.co.nz OPERATING INSTRUCTIONS & PARTS LIST 600mm BOX & PAN FOLDER AUSTRALIAN OFFICE Garrick Herbert Pty Ltd 460–462 The Boulevarde, Kirrawee, NSW 2232 AUSTRALIA (P.O.
Page 2
Thank you for purchasing this High Quality Box & Pan Sheet Metal Folder. This Machine has been constructed from High Grade Steel, which combines to give good strength and long life. All machining has been carried out on the latest computer controlled machinery to exacting standards.
Page 3
ADJUSTMENT: Your Machine is supplied with two sets of eccentric adjusting cams and these are used to make minor adjustments required for differing material thicknesses. These two sets (i.e. both ends of bender) serve two separate purposes, but will need to be adjusted in unison with each other. The hex cam adjustment located at the rear of the unit is provided to allow the Blade Carrier and blade assembly to be moved forward and backwards.