Vizio SB3651ns-H6 User Manual page 21

Function
Virtual:X
VRT:X
TV Remote
VZtv Rmt On
Program Remote
Prg Remote
Eco Power /
Energy Star Mode
Eco Pwr
Speaker Test
Spkr Test
Info
Info
LED Behavior
Press the Next/Previous button to enable/disable Virtual:X. When enabled (On),
Virtual:X On
all inputs will produce a virtual sound technology that simulates the effect of having
Virtual:X Off overhead sound. When disabled (Off), all sources will playback in without virtualization.
Press the Next/Previous button to enable/disable VIZIO TV Remotes. When enabled
TV Remote On
(On), you can use a VIZIO TV remote control to turn on the sound bar (using the TV
Volume Up button) and control volume.
TV Remote Off
Press the Next/Previous and Play buttons to toggle and select and program your TV
−− remote to control the Volume Down, Volume Up, and Mute functions on your sound
bar. See the Program Remote section for more information.
Press the Next/Previous button to enable/disable Eco Power Mode. When enabled
Eco Power On
(On), the sound bar will go into standby after a period of inactivity. The sound bar will
automatically turn off when no audio signal is detected. Off disables this feature.
Eco Power Off
Note: If you would like to cast content without the need to manually turn on the sound
bar, set this function to OFF.
Press the Play/Pause button to activate the speaker test function. A voice will begin call­
ing out each speaker beginning with left front (Left Front, Center, Right Front, Right Rear,
—
Left Rear, and subwoofer-white noise). If any of these are missing, check the connection
and run the speaker test function again.
Press the Play button to have the sound bar verbally announce the current sound bar
—
input and audio type being played with corresponding LED indicators.
Description
English - 21