Table of Contents If you have questions about the operation of your InTouch 510, be sure to check out the troubleshooting tips and FAQs beginning on page 11. More information can also be found on-line at w w w . c l a s s c o . c o m Introduction ...
InTouch Internet Call Waiting Alert Introduction With the InTouch 510, you’ll never miss another call while surfing the Internet. InTouch works with call waiting service from your local telephone company to detect and alert you to the presence of a call-waiting call while you’re online. You’ll know when someone’s trying to reach you when the unit flashes its LED and...
Installation In order to function, this product requires Call Waiting service from your local telephone company. Installation is easy. Simply follow these directions to install the unit and you can begin receiving calls while you’re on line. Unplug your modem line cord from the wall. If you have plugged a telephone into the modem or another wall outlet, unplug the telephone’s line cord now.
Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: Read and understand all instructions. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning.
Page 7
Do not overload wall outlets and extension cords, as this can result in the risk of fire or electric shock. 10. Never push objects of any kind into this product through cabinet slots, as they may touch dangerous voltage points or short out parts, resulting in the risk of fire or electric shock.
Modem Settings Your InTouch 510 will identify incoming “call waiting” calls even when you’re online. Make sure your modem is connected to the jack on the back of your unit marked MODEM. And be sure your telephone is plugged into the jack on the back of the unit marked PHONE.
Page 9
If your InTouch unit abruptly disconnects from the Internet as soon as you receive an incoming call, add the “ATS10=255” string to the Extra Settings in the Advanced Connections box. You can find additional information on how to make these changes by visiting our website at www.classco.com.Operation...
Your modem session must be active for at least 60-seconds (allowing time for the modem connection to become stable) before the InTouch 510 can detect calls. The LED on the front of the unit indicates the status of your modem and the InTouch 510...
Troubleshooting and FAQs Have Questions? Before contacting ClassCo or your dealer, check the following list of suggestions. You might be able to solve the problem yourself. You can also find more trouble shooting tips on-line at w w w . c l a s s c o . c o m Q: It’s not detecting call-waiting calls when I’m online...
Page 12
Q: I hear modem tones when I answer the telephone Check your connections. Make sure your modem is plugged into the MODEM jack on the unit, and that the telephone line from the unit is plugged into your telephone wall jack. Make sure your telephone is plugged into the jack marked PHONE on the back of the IT510.
FCC Part 68 and ACTA Information Your caller ID unit has been registered with the Federal Communications Commission (FCC), and it complies with the standards set forth in part 68 of the FCC rules. The FCC requires that we provide the following information. Connection And Use: The FCC requires you to use a modular telephone jack.
FCC Part 15 Radio Interference Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ClassCo Inc. a product that requires modification or adaptation to enable it to operate in any country other than the country for which it was designed, manufactured, approved and/or authorized, or repair of products damaged by these modifications.
Need help?
Do you have a question about the InTouch 510 and is the answer not in the manual?
Questions and answers