Advertisement

Quick Links

SERVICE
INFORMATION
SI number:
01/063/2021
Replaces:
01/050/2015
Title:
Product:
Priority:
Serial number range:
As part of the continuous product improvement, the correction signals of the BCM GPS receiver will be
changed.
Starting from 01.02.2021, StarFire correction signal might only be available to a limited degree
due to a frequency change. The usual accuracy of the GPS receiver will thus be reduced.
An update of the GPS firmware is required to receive coordinates with the usual accuracy (SF1/SF2).
Please inform the affected customers in your area!
The change of the firmware is to be carried out according to the enclosed description.
The required firmware is available for download under the following link:
https://www.bomag.com/ww-en/serviceinfostarfire2021/
Requirements for the new configuration:
Pos.
Part number
1
-
2
-
3
-
4
-
As well as a machine with the pre-fitting for BCM05 incl. the tablet and GPS (VM41, VM16).
Reimbursement
In the event of an affected GPS receiver during the warranty period, BOMAG will reimburse the following
upon submission of a warranty claim in accordance with the applicable agreed BOMAG GPS receiver:
1 hour labour
Modifications to receivers outside the warranty period are necessary, but will not be reimbursed via a
warranty claim.
Warranty claim
Only the costs stated in section Reimbursement can be reimbursed by means of a warranty claim.
Required information for the warranty claim:
Text: "Work performed according to service information."01/063/2021
o
Attach images/photos of the performed work.
o
GPS serial number.
o
If the required information is not provided, the warranty claim will not be valid.
Services & Solutions
S. Kneip
01/063/2021 – New correction signal frequency (2021) for the BCM 05 GPS receiver
New correction signal frequency (2021) for the BCM 05 GPS receiver
BCM 05
☐ Immediately
☒ Next service
-
-
-
-
-
Description
Machine with pre-fitting: BCM + Tablet + GPS (VM31, 32, 42)
Any USB 2.0 stick
File: SF3000_2.80S.s19 + Test Starfire3000.txt
File: SF6000.PRC + Test Starfire6000.txt
Date:
No. of pages:
☒ Fix-as-fail
☒ Information
01.02.2021
2
Quantity
1
1
1
1
1 / 2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bomag BCM GPS-STARFIRE 6000 and is the answer not in the manual?

Questions and answers

Summary of Contents for Fayat Bomag BCM GPS-STARFIRE 6000

  • Page 1 SERVICE INFORMATION SI number: 01/063/2021 Date: 01.02.2021 Replaces: 01/050/2015 No. of pages: Title: New correction signal frequency (2021) for the BCM 05 GPS receiver Product: BCM 05 Priority: ☐ Immediately ☒ Next service ☒ Fix-as-fail ☒ Information Serial number range: As part of the continuous product improvement, the correction signals of the BCM GPS receiver will be changed.
  • Page 2 Fax: +43 2258 20202-20 e-mail: italy@bomag.com e-mail: canada@bomag.com e-mail: austria@bomag.com FAYAT BOMAG Polska Sp. z.o.o FAYAT BOMAG Rus OOO BOMAG GmbH, Singapore Ul. Szyszkowa 52 Klyazma block, h 1-g 300, Beach Road 02-285 Warzawa 141400 Khimki, Moscow region, RF The Concourse #38-03...
  • Page 3 UPDATE INSTRUCTIONS BCM GPS – STARFIRE 6000...
  • Page 5: Table Of Contents

    UPDATE INSTRUCTIONS Table of contents General information ............................5 1.1. Introduction .............................. 5 1.2. Concerning your safety ..........................6 1.2.1. Basic prerequisites ..........................6 1.2.2. Basic safety regulations for safe operation ..................8 Preparations and commissioning ........................10 2.1. Assembly and system start-up (tablet) ....................10 2.2.
  • Page 7: General Information

    UPDATE INSTRUCTIONS 1. General information 1.1. Introduction General information These conversion instructions are intended for professionally trained personnel. These conversion instructions describe the removal, dismantling, assembly, installation and repair of components and assembly groups, insofar as this is reasonable with respect to tools and the spare parts supply.
  • Page 8: Concerning Your Safety

    UPDATE INSTRUCTIONS 1.2. Concerning your safety 1.2.1. Basic prerequisites 1.2.1.1. General information This BOMAG machine has been built in compliance with the latest technical standard and complies with the applicable regulations and technical rules. However, this machine may represent a danger to persons and property if: ▪...
  • Page 9 UPDATE INSTRUCTIONS CAUTION! Danger of material damage if failing to comply! Sections marked with this symbol indicate potential damage to machines or components. Sections marked with this symbol provide technical information or instructions on using the machine or its components. ENVIRONMENT! Environmental damage if failing to comply! Passages marked with this symbol indicate practices for...
  • Page 10: Basic Safety Regulations For Safe Operation

    UPDATE INSTRUCTIONS Hard hat This protects the head against falling parts and injuries. Hearing protection This protects against extreme noise. Respiratory protection This protects the airways against substances or particles. 1.2.2. Basic safety regulations for safe operation 1.2.2.1. Other remaining dangers and risks Despite careful work and compliance with standards and regulations it cannot be ruled out that further dangers may arise when working with and handling the machine.
  • Page 11 UPDATE INSTRUCTIONS 1.2.2.3. Modifications and alterations to the machine Unauthorised modifications to the machine are prohibited for safety reasons. Original parts and accessories have been specially designed for this machine. We wish to make explicitly clear that we have not tested or approved any parts or accessories not supplied by us.
  • Page 12: Preparations And Commissioning

    UPDATE INSTRUCTIONS 2. Preparations and commissioning 2.1. Assembly and system start-up (tablet) CAUTION! Risk of falling Take special caution when ascending and descending, especially in bad weather! 1. Insert the tablet into the corresponding cabin holder. 2. Insert the GPS into the corresponding roof holder and connect the cable. 3.
  • Page 13: Preparing The Software

    UPDATE INSTRUCTIONS 3. Preparing the software 1. Carry out the work steps according to the picture sequence: Figure 2 Click TAB uptwice and TAB down twice . Repeat several times. Figure 3 If you have problems at this point, there is also a short help video for step 2 in the download folder. Update instructions Correction signal frequency Starfire 6000 11 / 16...
  • Page 14 UPDATE INSTRUCTIONS 3. Carry out the work steps according to the picture sequence: Figure 4 4. Ignore the message “Back to BCM”. 5. Start the “NovaControl” software, which is located as an icon on the desktop that is now visible. If the icon is missing, the software is located in the Explorer under: c:\BOMAG_positioning\Support\John Deere\Starfire_3000\Novacontrol\NovaControl.exe Start by double-clicking.
  • Page 15: Performing The Update

    UPDATE INSTRUCTIONS 4. Performing the update CAUTION! Risk of data loss and damage The voltage supply must not be interrupted under any circumstances during the update process! 1. Carry out the work steps according to the picture sequence. Try all the different COM Ports until one connects.
  • Page 16: Success Control

    UPDATE INSTRUCTIONS Enter [USBLOADER]“sf6000.prc” including brackets and quotation marks and confirm with “Send”. Figure 7 4. Wait approx. 15 minutes for the update to complete. The LED flashes lite blue at the beginning. 5. Close the “Input terminal” window. 6. Remove the GPS receiver from the voltage supply for 2 minutes. 5.
  • Page 17 UPDATE INSTRUCTIONS 5. Carry out the work steps according to the picture sequence: Figure 9 6. Select and confirm the “Test Starfire6000.txt” file on the USB drive. 7. Click “Send.” 8. Check the software status. (4.40P) Figure 10 9. Exit the software and restart the tablet. 10.
  • Page 18 BOMA Equipment Hong Kong LTD BOMAG Italia Srl. FAYAT BOMAG Polska Sp. z.o.o. Room 1003, 10/F Charm Centre Via Roma 50 UI. Szyszkowa 52 700, Castle Peak Road 48011 Alfonsine 02-285 Warzawa Kowloon, ITALY...

Table of Contents