Description Of The Machine; Use Warnings - PAPILLON TB 280 XLN Instruction Manual

Cod. 99009 TB 280XLN

4. DESCRIPTION OF THE MACHINE

Switch ON: Fit the plug in the power socie. Take up a stable position. Grip the appliance
firmly. Do not lay the mowing head on the ground. Press the ON/OFF button (C).
Switch OFF: release the ON/OFF button (C). Always unplug at the end of every job.
Important: whenever you switch OFF the
motor, the cutting device continues to turn
for a few seconds .

6. USE WARNINGS

Important: to ensure safe, correct use, the edge cutter must be used
complete with all its components.
On small grassy zones, orient the edge cute uniformly to right and left.
The edge cutter is not suitable for mowing large zones.
If possible, cut with the left half. Loose cut grass, dust, stones, etc. are projected forward
in the opposite direction to the operator.
For best results, keep the edge cutter inclined to the left, at an angle of about 30°.
1 Main body
2 Safety guard
3 Main handle
4 ON/OFF trigger
5 Cutting head
5. USE INSTRUCTIONS
How to install the protective shield.
Check if the plug is unplugged from the power socket and if
the cutting blade is idle. Fully overturn the edge cutter
Place the protective shield as shown in the drawing, and rotate
it so that the four holes correspond to those of the edge cutter.
Fit the two screws and tighten them with a screwdriver.
Important The protective shield should be
placed on the grip side, to protect the
operator.
Assembly.
Attach Main Handle (A) onto the Main Body (F).
Switching ON or OFF.
17