LiveLife 4Gx Quick Start Manual

LiveLife
R
PERSONAL MOBILE ALARMS
Quick
Start
Guide
Lanyard/necklace hole
4G
MONITORING X
www.livelifealarms.com.au
Charging your pendant
Your device is usually close to being fully charged when you open your box.
When placing the device in the charging station ensure it is positioned
correctly. In the correct position it will vibrate and announce it is charging.
After 3-4 days, the battery will approach 20% charge.
When the battery approaches 20% a voice will announce "Battery is low.
Please recharge your battery". The red LED will start blinking. When the
battery reaches 10% charge though, the device will send a Low Battery text
reminder (contact 1 by default) that the battery needs to be charged.
You can also charge the device using the supplied magnetic USB cable. Plug the cable
TIP
into the power adapter and attach the other end to the 4 pins on the back of the device.
Speaker
SOS/Help button
For
charging via
the magnetic USB cable
4 Charging pins
Rear of pendant Front of pendant
Overview
Green mobile connection indicator
Side talk button
Voice announcements On/Off
Red battery light indicator
The pendant is water resistant and
can be worn in the shower or rain.
Microphone
Side of pendant
To turn the device on -press the grey, upper side button till it vibrates. The
LEDS will flash. Alternatively you can turn it on automatically by placing it in
the charging station or by connecting the magnetic USB cable to the back.
To turn the device off hold down the SOS button and the upper grey, side
button together till the device vibrates and side LEDS go off. Or send
the text command off to the device from a mobile phone.
The device uses Bluetooth to find its location inside the home. Outside
the home it uses GPS to find its location.
The Home Charging Station has been programmed with the GPS location of your
TIP
your home address you supplied us with. Please leave the station at your home
and plugged in at all times.
Home charging station
Shows the alarm is connected
Press to make an outgoing
call to your first contact.
Press to turn the voice
announcements on or off.
Blinks when the battery is low
HOMECHARGING STATION
Loosen and unwind the cable from underneath the station
and plug the USB cable into the white power adapter.
The lights around the station will come on.
Please ensure you place the device in the correct position
when charging. When correct it will vibrate and you will
hear the voice announcement "Your alarm is charging".
Turning on/off and finding your location
Lights
©2020. LiveLife Alarms. All rights reserved.