Clarion APX480M Owner's Manual page 11

APX480M manual.qxd 3/12/2004
FREQ (hz) L (mH)
80 8.0
100 6.4
125 5.1
150 4.2
200 3.2
NOTE: Chart values based on 4 Ohm speakers.
Figure 8
The amplifier can be configured for a mixed-mode operation on either
channels 1/2 or 3/4 amplifier sections. The table provides component
values to create a 6dB per octave crossover at specified frequencies. Use
components that have a + 5% tolerance and capacitors rated at 100V.
NOTE: Choose the same frequency for both LP and HP crossovers. Do
not overlap frequencies, as this may damage the amplifier.
1:07 PM Page 11
Operation/Installation Manual
Mixed-Mode System On Rear; Full-Range
Speakers On Front
C (uF)
497
398
318
265
199
9