Specifications - DCS 090 Series Reference Manual

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182E-MAIL: szss20@163.com

SPECIFICATIONS

This section covers the basic specifications common to all M090 series controllers. Specific
features of different variants are covered in their detail documentation.
Parameter
Display
(display type must be specified when
ordering)
Operator Controls
Resolution (Control and Display)
Control Algorithm
Load Control
Sensor inputs available
(sensor type must be specified when
ordering)
Alarm Contact (optional)
Alarm Sounder (optional)
Operating Power Requirements
Ambient Operating Conditions
Mechanical Dimensions
Weight
Ambient Storage Conditions
2/21/05
SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL: szss20@163.com
090 Series Reference Manual
3 or 4 digit, 0.56" 7 segment LED
Optional 'Output Active' LED
(Green is standard, red & yellow available)
Front panel 'UP' and 'DOWN' buttons
On-board jumpers for option control
± 1 least significant display digit
PID
PWM Triac contact rated 15 Amps RMS
10 mV/ °C integrated sensor
Type 'J' or 'K' thermocouple
100 Ohm RTD
Analog voltage (5 volts max)
2 dry contacts field configurable as NO or NC.
Rated 110VAC, 1A.
85dB, 2 KHz beeper
80 to 280 VAC, 45 - 65 Hz, 5W max
0 to 50 degrees Celsius
0 to 80 %RH non-condensing
Pollution Degree 2
Main ECB:
Power ECB: 1.9" x 2.0" (5 x 5 cm)
Main ECB:
Power ECB: 1.5 Oz (42 g)
-30 to 85 °C
0 to 90%RH (non-condensing)
Digital Control Systems
Value
5.25" x 2.35" (13.5 x 6 cm)
2.3 Oz (65 g)
Page: 2