Rear Panel Controls; Figure 3: Itc-1600 Rear Panel Controls - Instrutech ITC-1600 User Manual

I C
NSTRUTECH ORPORATION
8
Trigger Input:
A BNC connector provides access to the external trigger input. A TTL trigger
pulse can be given to start data acquisition. The ITC-1600 will be triggered
with a positive logic pulse with a minimum duration of 150ns. This input is
optically isolated from the computer. The absolute maximum voltage range for
this input is -0.5 volts to +5.5 volts. Do not exceed this range or damage can
result to the input circuitry.

2.2 Rear Panel Controls

Circled numbers reference to the diagram of the front panel.
20 mm type F 2
Power
A
Fuse
FUSE
100 - 240 V
3
1 2
1
Power Switch:
Push-button type. Press once to power on, press again to turn off.
2
Power Connector:
Accepts standard three wire IEC female type power cords. The
!
appropriate power cord will be provided with the ITC-1600. The ITC-
1600 will function with a line voltage of 100 volts AC to 120 volts AC
or 200 volts AC to 240 volts AC. Acceptable line frequencies are from
47 hertz to 440 hertz. The maximum power used by the ITC-1600 is
fifteen watts. WARNING: To avoid a shock hazard, the ITC-1600
must be plugged into a properly grounded receptacle.
3
Fuse:
Replace fuse with a standard 20 mm type F 2A fuse only. Littelfuse
#217002.
Digital Outputs Digital Inputs
4

Figure 3: ITC-1600 Rear Panel Controls

ITC-1600 U
InstruLINK
Asynchronous ADC Inputs
In Out
AD 0
Rx
Tx
5 6
' M
SER S ANUAL
AD 3
AD 1 AD 2
7
15