D-Link DWA-130 Quick Install Manual page 3

Software Installation
Warning: Do NOT install the DWA-130 Wireless N300 USB Adapter into your
computer before installing the driver software from the D-Link CD.
Step 1:
Insert the CD into the CD drive of your computer. The set-up wizard should
start automatically. Make sure that your internet connection is active. (Do not
plug in DWA-130 yet).
Note: If the CD Autorun function does not automatically start on your computer, go to
Start > Run. In the run box type "D:\autorun.exe" (where D: represents the drive letter
of your CD-ROM drive) and click OK.
Step 2:
Select the language you want the setup wizard to display. Click Next to continue.
Step 3:
The Welcome screen will appear. Click Next to continue.
Step 4:
You will now be asked to plug the DWA-130 adapter into an available USB port.
Once you plug it in, click Next to continue. Follow the steps within the wizard to
complete the set-up of DWA-130.
3 D-Link DWA-130 Quick Install Guide