GOODRICH Stormscope Series II Installation Manual page 2

Chapter 1 – General Information
This chapter includes equipment specifications and a functional description. It describes the various hardware
configurations and includes a list of items furnished and items required but not supplied with the equipment.
Chapter 2 – Installation
This chapter contains instructions for unpacking the equipment and inspection for in-shipment damage. It also
includes information required to locate, assemble and install the equipment.
Chapter 3 – Installation Checkout
This chapter contains instructions for doing post-installation and return to service checkout of the WX-950 using
the Goodrich Avionics SystemsWX-PA Portable Analyzer Kit.
Chapter 4 – Maintenance
This chapter contains general flightline maintenance procedures. It includes periodic maintenance and
troubleshooting; and instructions for the return of defective components.
Appendix A – Signal and Cable Characteristics
This appendix defines the electrical characteristics of all input and output signals.
A
Rev. C
ABOUT THIS MANUAL
© Copyright 1996-2001
Goodrich Avionics Systems, Inc.
____________________________
Stormscope® is a registered trademark of Goodrich Avionics Systems, Inc.
Mylar ® and Teflon® are registered trademarks of Dupont.
Trademarks