Use Of The Appliance - ICON Inox Kettle Manual

EN
Description:
1. Spout
2. Lid
3. Handle
4. Water gauge
5. On - Off button
6. Power base unit
7. Lid opening button
8. Scale filter
INOX KETTLE
IQBP201102
220-240VAC 50/60Hz 1850-2200W 1.7L
Valued customer,
Congratulations on your selection. Color Your Life with innovative, uniq and designed
ICQN Products.
This user manual is part of our ensure to customer satisfaction, safety and product
quality during the service life of your new product.
Please read this user manual carefully before use the product.
Welcome to ICQN world.

USE OF THE APPLIANCE

Please read the user manual carefully before you use your appliance.
• Unwind the wrapped wire completely.
• Pour the water you firstly filled and boiled in your appliance after it is boiled. So that,
you'll clean your appliance.
• Remove all packaging materials and labels from the appliance.
• Place the appliance on a flat, solid surface.
• Pour the water into the water heater at the desired amount.
• Do not touch any part of the appliance except the handle when the appliance is in
operation and make sure that the lid of the appliance is properly closed.
2
8
1
4
6
• The amount of water you have put in the appliance will be seen with a water level
indicator. Note that the water you filled the appliance is always more than the MIN
level and less than the MAX level, and make sure that the lid is fully closed.
• The heater base is located just below the water heater body, and the water heater
body sits properly on the tank.
7
• Plug in the appliance.
• Turn the on/off switch to the opening position (I), the light aligned to direction of the
water level indicator will flash and the water inside the appliance will start heating.
• When the water in the appliance boils, the light will turn off automatically when the
3
on/off button is turned off. The on/off button may be used to stop the water heating
of theappliance in each cycle of water heating.
• You can transfer the hot water to any other container of your choice.
• The appliance has a safety protection circuit against waterless operation. In the event
of waterless operation, the appliance will automatically turn off the heating elements.
In such a case, unplug the appliance from the outlet. After allowing the water heater
5
for 15-20 seconds, you can refill it with water.
CAUTION!
The amount of water you put into the appliance must never exceed the MAX level.
Otherwise, the water may overflow.
CAUTION!
If you tilt your appliance backwards more than 30°C, some water may spill. For this
reason, do not tilt the appliance backwards with water in it.
DESCALING
If the appliance turns off automatically before reaching the boiling point, it is a sign
that it should be descaled.
Add 1/3 vinegar and 2/3 water mixture into the appliance. Pour after boiling 2 or 3
times.
After performing the descaling process, boil the appliance 1-2 times with clean water
and rinse. Then drain away the boiling water.