Page 2
*Disclaimer : All trademarks are the property of their respective owners which are in no way associated or affiliated with Kuassa. The manufacturer names and model designations are used solely to identify the products whose tonal and sound characteristics were studied during development.
*Disclaimer : All trademarks are the property of their respective owners which are in no way associated or affiliated with Kuassa. The manufacturer names and model designations are used solely to identify the products whose tonal and sound characteristics were studied during development.
Page 4
Mac’s default VST/VST3/AU/AAX plug-ins and Standalone path (see below). Alternatively you can customize the installation target to specific folder. Here are the default folders installation path for each of our supported platforms in Mac OSX: • Mac Audio Unit (EVE-AT1.component) : /Library/Audio/Plug-Ins/Components/ • Mac VST (EVE-AT1.vst) : /Library/Audio/Plug-Ins/VST/Kuassa/ •...
Page 5
• /Users/[User Name]/Music/Kuassa/Settings/EVE-AT1.setting Windows VISTA or Later Use “Add/Remove programs” or “Programs and Features” from the Windows Control Panel. If EVE-AT1 does not listed, delete the .dll/.vst3/.aaxplugin file from your VST plug-in folder. After Uninstallation, manually delete other EVE-AT1 file resources at, Folder: •...
Page 6
License]. Locate the License File [EVE-AT1.kuassa] obtained from the confirmation e-mail sent to you after you purchase EVE-AT1 Plug-in(s) from our web store or downloaded from member area. Note that the License File contains your personal information used to authorize the plug-in.
Page 7
About Box by clicking plug-in will show. the EVE-AT1 logo on the bottom left corner. If your authorization is successful, either your name or your e-mail address will be shown on the About Box. You will also notice that the generated noise/silence on the Evaluation Version is now gone.
Page 8
Q Toggle Buttons: Changes the shape / Q value of the corresponding File] button: The Menu button contains several functions; preset saving, frequency. license file authorization, and shortcuts to the user manual and Kuassa Frequency Gain: Boost or cut the corresponding frequency, approximately website.
Page 9
• “Save Preset As”: Saves current settings into a new preset file (*.ke1p for EVE-AT1). All presets inside these folders will be recognized by the plugin as individual presets, you can also create a folder to group the preset(s). They will thus be shown on the EVE-AT1 Plug-in’s preset selector.
Page 10
When you create a new preset using “Save Preset As...”, make sure that you have chosen the correct preset folder as aforementioned on point 1 above to make sure that it will be recognized automatically by EVE-AT1 plug-ins.
Page 11
To add new additional preset banks, create a new folder by clicking “New Folder” button and rename it. Sub-folders are also recognized to manage presets into groups, useful to manage additional preset bank, or grouping presets based by their use.
Page 13
Bypass Slider: Turns the EQ on, off, or bypass. Preset Selector: Select from available Presets, press left-right buttons or select from drop down menu. Phase button: Click to flip the phase of the output 180 degrees SECTION. Output Trim: Increase or decrease the track output volume after equalization.
Page 14
[144] = highCutFreq [137] = lowMidGain [145] = phaseOn [138] = highMidFreq [146] = outputVol 2 Audio input and output sockets : Please note that EVE-AT1 is an FX, and should always be added as FX device instead of instrument.
Page 15
Kuassa EVE-AT1 Created by: Muhammad Abduh Intan Zariska Daniyanti Iman Firman Amarullah Juan Prahamma Hartjamt Dimitar Nalbantov Arie Ardiansyah Raden Pratama Kusuma Adhitya Sulistia Wibisana Bramantyo Ibrahim Cil Satriawan Grahadea Kusuf Iqbal Ansyori Rathomi Trinugraha Bayu Ardianto Sundawan Sukmaya Presets and Audio Demos by:...
Need help?
Do you have a question about the EVE-AT1 and is the answer not in the manual?
Questions and answers