Table of Contents
Advertisement
OPERATION
Quick Start
Caution!
• Before washing, please make sure the washing machine is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it's recommended to
clean your appliance before first use. For this reason, start the Cotton program
at 90°C without laundry and detergent.
1. Before Washing
1
earth
terminal
Plug in
Note!
• Detergent need to be added in compartment I if the pre-wash function is selected.
2. Washing
1
Select Programme
Select function or
default
3. After Washing
The door lock and the [Start / Pause ] lights flash with the buzzer beeping or two small
points flash on the digital screen.
2
Open tap
Load
2
Start up
3
Close door
3
13
4
5
Main
wash
Softener
Prewash
Add detergent
Advertisement
Table of Contents
