Table of Contents
Advertisement
Available languages
Available languages
Levita D'lite 200
5
Getting started
5.1
Buttons
4
5.2
Battery installation
1.
Hold the upper part of the flashlight and turn the battery cover counter clockwise until
the part gets separated.
2.
Remove the battery compartment from the upper part and put the 3 included AAA
rechargeable batteries into the compartment following the indicated polarity. Reinstall
the battery compartment.
3.
Close the flashlight securely by turning the battery cover of the flashlight clockwise.
•
Do not install or try to recharge non-rechargeable batteries.
•
Only use the batteries supplied with the flashlight.
•
Do not short-circuit & dispose of in fire.
•
Remove the batteries if this device is not going to be used for a long
period.
4
3
2
1. LED lights
2. MODE button
3. ON/OFF button
4. Battery cover
1
Levita D'lite 200
Advertisement
Table of Contents
