Thermostat - Gamko Noverta GM Series User Manual

Using the thermostat
For use and settings of the thermostat, please
refer to the manual supplied with this product.
XR02CX for GM2/212MU and GM/212VS.
To see the set point.
1. Push and immediately release the SET key, the set point will
be showed;
2. Push and immediately release the SET key or wait about 5 sec
to return to normal visualisation;
To change the set point.
1. Push the SET key for more than 2 sec to change the set point
value;
2. The value of the set point will be displayed and the °C or °F
LED starts blinking;To change the SET value push the o or n
arrows within 10 sec.
3. To memorise the new set point value push the SET key again
or wait 10sec.
XR07CX for GM2/2 and GM2/22.
To see the set point.
1. Push the SET key two times, the set point will be showed.
2. Push the SET key three times to return to normal visualisation.
To change the set point
1. Push the SET key for more than 2 sec and then push the SET key
again;
2. The value of the set point will be displayed and the "°C" LED starts
blinking;
3. To change the Set value push the UP or DOWN button;
4. To memorise the new set point value push the SET key three
times.
36
User Manual

Thermostat