Advertisement
HOW TO TIGHTEN A BANJO HEAD
A
To tighten it up, first take off most
of the thumb screws which holds
the resonator to the flange so you
can access all of the lugs that
tightens the head.
D
Tighten lug nuts. Start off on one
side and move towards the opposite
lug on the other side.
4
www.PyleUSA.com
Remove all of the thumb screws that
hold the resonator to the flange.
Tighten it kind of a fraction of a turn.
You have to two-thirds of a turn at a
time. Go around a circle in that same
sort of pattern.
B
C
Remove the banjo assembly from
the resonator and set that aside.
E
F
Replace the resonator to the banjo
assembly and tighten back all the
thumb screws.
Advertisement
