Advertisement
1. Open the Charging Port Cover to expose the Micro USB Charging Port.
2. Using the USB charging cable provided, plug the micro USB tip into the Micro USB Charging
Port and plug the other end into an USB port on your computer or USB wall charger (not
included). The LED Indicator Light will illuminate red while charging and turn off when
completed. A full charge will be 4-5 hours.
3. When charging is complete, make sure to securely close the USB charging port cover.
This must be pushed tightly back in its place and sit flush with the side of the unit. The
warranty will not cover damages if the USB charging port cover is not secured
correctly before being exposed to water.
To turn on and off the speaker, press and hold the Power Button.
Press the LED Light Button continuously to cycle through the various colours, automatic changing
colours and off/on.
Pairing a Bluetooth Enabled Device for the First Time to your Bluetooth Speaker
NOTE: Refer to the user manual for your Bluetooth enabled device for instructions on pairing and
connecting Bluetooth devices.
1. Keep the unit and your Bluetooth enabled device within 1 metre at all times during the pairing
process.
2. Press and hold the Power Button, release it when you will hear an alert tone and the LED
Indicator Light will start to flash blue quickly.
3. Turn on the Bluetooth function on your Bluetooth enabled device and search for Bluetooth
devices. When the search is complete, select "BTSPK59" from the Bluetooth device list. (If a
password is required, use "0000" to finalize the pairing process.)
4. When the Bluetooth connection is successful, you will hear an alert tone and the LED
Indicator Light will illuminate blue. This means you are connected and the speaker is ready
for use.
NOTE:
•
If pairing was unsuccessful, turn off the speaker first and repeat the steps above to re-pair
again.
•
After successful pairing, paired devices will remember each other. Unless pairing information
is deleted, re-pairing is not required after the first time.
•
If you want to pair the unit with other Bluetooth enabled devices, please disconnect/remove
the existing device and pair with the new device according to the steps above.
CHARGING THE SPEAKER
POWER ON/OFF
LED LIGHT FUNCTION
BLUETOOTH MODE
E-3
Advertisement
