Page 1
Mobile Conference Speaker, Bluetooth and USB compatible Quick Installation Guide DA-12221...
Page 2
1. Introduction The DIGITUS® Conference Room Speaker System is designed for stationary and mobile applications. Transform the room of your choice into a conference room. The four integrated speakers ensure an optimal distribution in the room to guarantee clear voice quality for all participants. The speaker can either be connected wirelessly with a smartphone or notebook via Bluetooth or directly via a USB cable connection.
Page 3
• Charging voltage: 5 V DC / 1 A • Bluetooth version: 5.0 • USB connection: Micro USB • Aux in: 3.5 mm jack socket (only for playing music) • Battery capacity: 2500 mAh (lithium ion rechargeable battery) • Charging time: 2-3 h •...
Connect DA-12221 with Bluetooth-enabled devices: After power on, the [] button flashes. Turn on the Bluetooth function of the mobile phone and select DA-12221 in the list of available devices After selecting the device, it will automatically connect. The [] button stops flashing after connected, then you can play music or make a hands- free call.
Page 5
[] button for 4 seconds. Note: DA-12221 can connect up to two Bluetooth devices. 9. Disconnect the Bluetooth 1) Open your mobile phone and click DA-12221 in the connected device to disconnect. Hold down the [] button for 2 seconds to disconnect the Bluetooth, the []...
Page 6
12. Hands free After the Bluetooth connection is successful, you can use the DA-12221 to make a hand-free call at any time. When there is an incoming call, you can click [] button answer the call, and press [] button 2 seconds to reject the call. Double press [] dial back the last call.
Page 7
Due to the different social APPs have different operation mode, the [] key of DA-12221 may be invalid. You’ll need to manually operate on the APP to answer or end the call. If you don’t want the other party to hear you during a call, you can click the [] key to turn off the...
Page 8
After connecting the DA-12221 with a mobile phone or computer (using Bluetooth or USB data cable connection), it is recommended to place the DA-12221 in the center so that everyone can hear clear. 1) The mode 1 for conference: The Bluetooth of mobile phone connecting with speaker.
15. Troubleshooting Q: My speaker will not switch on. A: Please recharge it and make sure it has enough power. Plug the unit into a charger and see if the power LED indicator turn Q: Why can’t I pair this speaker with other Bluetooth devices? A: Please check the following: Your Bluetooth device supports the A2DP profile.