Garde 181CHEESBLKW User Manual

Garde 181CHEESBLKW User Manual

Cheese blocker

Advertisement

USER MANUAL
Cheese Blocker
Item #181CHEESBLKW
07/2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 181CHEESBLKW and is the answer not in the manual?

Questions and answers

Summary of Contents for Garde 181CHEESBLKW

  • Page 1 USER MANUAL Cheese Blocker Item #181CHEESBLKW 07/2020...
  • Page 2 USER MANUAL Please read and comply with the instructions listed on this document. To get the best service life and performance from your machine, clean it thoroughly before and after each use by following the instructions listed below. Minimize the use of alkaline cleaners as they may dull the finish and cause pitting. Operation 1) Place the unit on a sturdy work surface. 2) Using the handle, lift and hold the cutting wire in the upright position. 3) Place cheese block on the cutting surface. Make sure the part of the cheese that is to be cut is on top of the groove. 4) Gently pull handle so that tension is added to the cutting wire. 5) While maintaining tension on the cutting wire, slowly but firmly lower the handle and press the cutting wire through the cheese block. Cleaning and Maintenance 1) Remove the cutting wire. 2) Thoroughly clean the main frame and the cutting wire. 3) Dry all components and re-assemble the unit. Replace Cutting Wire 1) Firmly grasp the handle with both hands and twist both sides in opposite directions to separate the two halves. Unhook the cutting wire. 2) On the bottom of the unit, unhook the opposite end of the cutting wire. Remove the old cutting wire from the unit. 3) Hook one end of the new cutting wire on the bottom of the unit.
  • Page 3 USER MANUAL Replacement Parts Cutting Wires 12pk Cheese Blocker Feet 4pk Cheese Blocker Handle #181CHSWIRE12 #181CHSBLKFT #181CHSBLKHDL Cheese Blocker Springs #181CHSSPRING...
  • Page 4 EQUIPMENT LIMITED WARRANTY Garde warrants its equipment to be free from defects in material and workmanship for a period of 1 year. This is the sole and exclusive warranty made by Garde covering your Garde brand equipment. A claim under this warranty must be made within 1 year from the date of purchase of the equipment.

Table of Contents