Troubleshooting Guide - Craftsman CMEHTS8022 Instruction Manual

damages, so these limitations may not apply to you. This
warranty gives you specific legal rights and you may have
other rights which vary in certain states or provinces.
90 DAY MOnEY BACK gUARAnTEE
If you are not completely satisfied with the performance of
your CRAFTSMAN Power Tool or Nailer for any reason, you
can return it within 90 days from the date of purchase with
a receipt for a full refund – no questions asked.
lATin AMERiCA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in
the packaging, call the local company or see website for
warranty information.
FREE WARning lABEl REPlACEMEnT: If your warning
labels become illegible or are missing, call 1-888-331-4569
for a free replacement.
For assistance with your product, visit our website at www.craftsman.com for a list of service centers, or call CRAFTSMAN
at 1-888-331-4569.
PROBlEM
Slow running, noisy or hot blades.
Unit will not start.

TROUBLESHOOTING GUIDE

BE sURE TO FOllOW sAFETY RUlEs AnD insTRUCTiOns
CAUsE
Dry, corroded blades.
Blades or blade support bent.
Bent or damaged teeth.
Loose blade bolts.
Lock off not fully operated
Cord not plugged in.
Circuit fuse is blown.
Circuit breaker is tripped.
Cord or switch is damaged.
CORRECTiOn
Lubricate blades.
Straighten blade or blade support.
Straighten teeth.
Tighten blade bolts.
Check that lock off is fully pulled back prior to moving main trigger.
Plug tool into a working outlet.
Replace circuit fuse. (If the product repeatedly causes the circuit fuse to
blow, discontinue use immediately and have it serviced at an authorized
service center.)
Reset circuit breaker. (If the product repeatedly causes the circuit fuse to
blow, discontinue use immediately and have it serviced at an authorized
service center.)
Have cord or switch replaced at an authorized service center.
English
9