Rfc1213-Mib (Mib-Ii) - Cisco Catalyst X6148 Datasheet

Catalyst 6500 series 10/100 and 10/100/1000 ethernet interface modules
Hide thumbs Also See for Catalyst X6148:
Table of Contents

Advertisement

All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
EN 60825
21CFR1040
EMC Compliance
FCC Part 15 (CFR 47) Class A
VCCI Class A with UTP, Class B with STP
EN55022 Class A with UTP, Class B with STP
CISPR 22 Class A with UTP, Class B with STP
CE marking
AS/NZS 3548 Class A with UTP, Class B with STP
Network Management
ETHERLIKE-MIB (RFC 1643)
IF-MIB (RFC 1573)
Bridge MIB (RFC 1493)
CISCO-STACK-MIB
CISCO-VTP-MIB
CISCO-CDP-MIB
RMON MIB (RFC 1757)
CISCO-PAGP-MIB
CISCO-STP-Extensions-MIB
CISCO-VLAN-Bridge-MIB
CISCO-VLAN-Membership-MIB
CISCO-UDLDP-MIB
CISCO-ENTITY-FRU-CONTROL-MIB
CISCO-COPS-CLIENT-MIB
ENTITY-MIB (RFC 2037)
HC-RMON

RFC1213-MIB (MIB-II)

SMON-MIB
Inline-Power Specifications
IEEE 802-3af: Output power per port: Typically 54V up to 350 mA
Cisco Prestandard: Output power per port: Typically 42V up to 166 mA
Pin assignment: 1, 2, 3, and 6
Maximum Station-to-Station Cabling Distance
10/100BASE-TX, 100BASE-TX Fast Ethernet, and 10, 100, and 1000 Mbps: Category 5,
5e, and 6 UTP: 328 ft (100m), 100-ohm STP: 328 ft (100m); half or full duplex
Maximum power: Off (maximum power condition not reached); on (maximum power
condition reached; no more phones will receive inline power from this module)
Indicators and Interfaces
Solution Overview
Page 17 of 18

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents