nux NPS-1 Installation Manual

NPS-1 Piano Stand

lnstallation Guide

List of Parts

Triple Pedal Unit
Left Sideboard Right Sideboard
f'
Corner Bracket
-
�
Sideboard Stand Pad
-
M6*20 Screw
�
-
M5*35 Screw
BA4*12 Screw
KA3.5*12 Screw
Wooden Connector
c:::::::
Cable organizer
�

Installation

1. Assembling the two Side Boards.

Corner Bracket
Left Sideboard Right Sideboard---
Sideboard Stand Pad
2. Assembling the Triple Pedal Unit & the Backboard.
a. Lay down the Triple Pedal Unit on the leveled ground,
untie the triple pedal cable. Attach the triple pedal unit
to the sideboards with 4 M5*35 screws.
F
Backboard
Quantity: 4PCS M5*35 Screw
Quantity: 4PCS
Quantity: 4PCS
b. Put wooden connectors into the backboard as shown.
Quantity: BPCS
Quantity: BPCS
Quantity: BPCS
[ - - -- - � - --J - -- - -- -]·)cU
Quantity: 2PCS
Quantity: 2PCS
c. Secure the backboard to the sideboards with 4 M5* 35
screws.
M5*35Screw
Triple Pedal Unit
M5*35Screw
�
Backboard
t
Wooden Connector
Backboard

3. Mount the Keyboard.

Hold the keyboard horizontally, and place it on the stand,
then secure the keyboard to the stand with 4 M6* 20
screws. Plug in the triple pedal cable to the [Triple Pedal]
Jack, use the cable organizer to keep the triple pedal cable
in place.
1 · �· · 1 C}
� ao
0
,
=1....J
M6*20Screw
�Cable organizer

4. Installation completed.

www.nuxefx.com
Made in China
Ba=
o