Matco Tools UHL30W Operating Instructions Manual page 3

28. This product may contain one or more chemicals known
to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands
thoroughly after handling.
29. Handling the brass parts of this product will expose you
to lead, a chemical known to the State of California
to cause birth defects and other reproductive harm.
Wash hands after handling.
service:
30. Light service must be performed only by the MATCO
authorized service centers listed. Service or
maintenance performed by unqualified personnel may
result in a risk of injury. Repair by unqualified personnel,
use of unauthorized parts, and failure to follow
maintenance instructions may create a risk of shock
or injury.
specific safety rules:
DO NOT let comfort or familiarity with product replace
strict adherence to cordless product safety rules. If
you use this tool unsafely or incorrectly, you can suffer
serious personal injury.
FEATURES
• Super bright 30 Watt fluorescent bulb provides 1200-1500 lumen
• Electronic ballast for quicker starts and longer life
• Ratcheting hooks provide safe and firm attachment
• Hooks telescope from 47" to 70" and allows light to attach to most SUV's and trucks
• Soft coated padded hooks helps prevent scratching of the vehicle surface
• Large hook design allows light to be used as an under car light
• 18/2 SJTOW 25' UL cable remains flexible in cold weather and is oil and grease resistant
• UL and cUL listed
OPERATING INSTRUCTIONS
• To use, plug the unit into any 110-120V AC power source, such as a wall receptacle.
• Press the on/off switch (l) to turn on.
• Press the on/off switch (o) to turn off.
• The hooks can be adjusted by simply pulling out on them and affixing to whatever surface you like, such as a car hood (up to 70" long).
• Once your light is in place, it can be rotated to the desired position by simply twisting the light. You will hear ratcheting "clicks" as you
rotate it.
TO CHANGE THE BULB
• Unplug the light from any power
source before attempting ANY repair.
• Replace with 30W T8 style bulb only.
• On the handle end WITHOUT the
on/off switch, unscrew the six
screws from the handle.
• Carefully pull the two handle pieces apart, exposing the wiring and bulb socket.
• Ease the bulb socket carefully out of the lens tube. cAution: Do NOT pull the wiring out of it.
• Once the bulb socket is removed, pull the bulb out of the lens tube.
• Assembly is the reverse of disassembly. cAution: Do NOT pinch wires between the handle halves when reassembling.
UHL30W
UHL30W 30W Underhood Light
3
1. Hold light by insulated gripping surfaces when
performing an operation avoiding contact with hidden
wiring. Contact with a "live" wire will also make
exposed metal parts of the light "live" and shock
the operator.
2. Always be sure you have firm footing.
3. Be sure no one is below when using the light in high
locations.
4. Some material contains chemicals which may be toxic.
Take caution to prevent working dust inhalation and
skin contact. Follow material supplier safety data.
wArning: Misuse or failure to follow the safety rules
stated in this instruction manual may cause serious
personal injury.
note: The warnings and cautions discussed in this
instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood by the
operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by
the operator.
11/13/14