Advertisement
Quick Links
D
E
The IV Pole should include:
A 1 tripod tube
B 1 5-footed plastic mid-section
C
1 clamp disk
D 2 feet with locking casters
E
2 feet with electrically conductive casters
F
1 foot with a regular swivel caster
G 1 top and 1 bottom plastic IV holder
H 1 drip glass, 1 glass-holder ring
I
1 wrench (not pictured)
Grooves
Step 2.
Place the clamp disk with the grooves facing
downward onto the 5-footed plastic mid-section.
ASSEMBLY INSTRUCTIONS FOR
IV Poles (#10650 & 10651)
F
H
B
C
Call Free 1.800.848.1633 • Fax Free 1.800.447.2923
Web: GoHCL.com • Email: hcl@GoHCL.com
A
G
Step 1.
Slide the 5-footed
plastic mid-section onto the
larger end of the tripod tube.
Push down on it until it
comes to a stop.
Step 3.
Place the locking spacer into the center opening of
the clamp disk. The teeth should fit down against the disk.
© Health Care Logistics, Inc. 2012
Advertisement
Related Manuals for Health Care Logistics 10650
Summary of Contents for Health Care Logistics 10650
- Page 1 ASSEMBLY INSTRUCTIONS FOR IV Poles (#10650 & 10651) The IV Pole should include: Step 1. Slide the 5-footed plastic mid-section onto the A 1 tripod tube larger end of the tripod tube. B 1 5-footed plastic mid-section Push down on it until it 1 clamp disk comes to a stop.
- Page 2 ASSEMBLY INSTRUCTIONS FOR IV Poles (#10650 & 10651) Step 4. Thread the cheese-head screw into the locking spacer Step 5. (A) Lift the clamp disk up and slide one of the feet leaving it loose so the feet can still be easily inserted into the with electrically conductive casters into the 5-footed plastic footed mid-section.
- Page 3 ASSEMBLY INSTRUCTIONS FOR IV Poles (#10650 & 10651) Height Step 8. Make sure the grooves of the clamp disks are in Adjuster the holes of the feet. Tighten the clamp disk by turning the cheese-head screw clockwise with a hexagon socket-head wrench to secure all five feet into the 5-footed plastic mid- section.
- Page 4 ASSEMBLY INSTRUCTIONS FOR IV Poles (#10650 & 10651) Step 11. Insert the tabs on the top section of the Plastic IV Holder into the grooves on the bottom section of the Plastic IV Holder. Step 12. Hold the tripod tube and lightly tap the top of the plastic IV holder with a rubber mallet until the top overlaps the bottom section.
- Page 5 ASSEMBLY INSTRUCTIONS FOR IV Poles (#10650 & 10651) Step 14. Place the drip glass into the glass-holder ring. Step 15 . Hang an IV bag or bottle onto the Plastic IV Holder. The pole is now ready for use. Call Free 1.800.848.1633 • Fax Free 1.800.447.2923 Web: GoHCL.com •...