Removing The Palm Vein/Fingerprint Sensor Sub Board - Fujitsu CELSIUS H7510 Manual

Removing the palm vein/fingerprint sensor sub board

Required work steps:
■ Removing the battery
■
Removing the service door
■ Removing the 2.5" HDD
■
Removing the LTE module
■ Removing the WLAN module
■
Removing the lower assy
► Remove the screws M2.5XL6 (yellow circle).
► Remove the bracket in the direction indicated by the yellow arrow.
Page 29 of 52
Required tools:
■ Screwdriver: Phillips PH00