Sensored Life MarCELL Pro Quick Start Manual

Temperature Probe Installation

MarCELL PRO's temperature probe is waterproof and allows for
measurement of temperatures from -20°F to 120°F. When the
probe is not plugged in, temperatures are read from an internal
temp sensor within the base unit. For the most common application
of measuring the temperature of a freezer or refrigerator, it is
recommended to follow either of these best practice steps to ensure
a good seal across the gasket:
Use tape (masking or painter's
tape usually works well) to
ensure a full seal across the
gasket
"Snake" the probe inside of the
gasket and ensure the gasket is
properly reseated.
Ensure the probe tip is deep enough within the freezer or fridge it
is not subject to false alarms when the door is momentarily
opened.

LIMITED WARRANTY

Sensored Life LLC, hereby warrants that it will repair or replace, at its option, any part of the MarCELL
Temperature, Humidity and Power Alarm (hereafter known as MarCELL), which proves defective by reason of
improper workmanship or material, free of charge for parts and labor, for a period of 1 year from the date of
original purchase by the buyer. This warranty does not apply if, in the sole opinion of Sensored Life, MarCELL has
been intentionally damaged due to misuse, neglect, improper packing, shipping, modification or servicing by other
than Sensored Life, or personnel authorized by Sensored Life. For information on how to obtain service under this
warranty contact the dealer where your MarCELL was purchased or contact Sensored Life via our website at:
www.SensoredLife.com or www.MarCELLPRO.com.
4
Quick Start Guide

FCC COMPLIANCE STATEMENT

This device complies with part 15 of the FCC rules. Operations is subject to the following two conditions:
1) This device may not cause harmful interference and 2) this device must accept any interference received including interference that
may cause undesired operation

LIABILITY DISCLAIMER STATEMENT

Sensored Life,LLC (hereafter known as Sensored Life) makes no warranty, representation, or guarantee regarding the suitability of its
products for any particular purpose, nor does Sensored Life assume any liability arising out of the application or use of any product, and
specifically disclaims any and all liability, including without limitation consequential or incidental damages. Sensored Life products are not
designed, intended, or authorized for use as components in life support systems, or for any other application in which the failure of the
Sensored Life product could create a situation where personal injury or death or significant financial loss may occur.
Should any person or persons purchase or use Sensored Life products for any such unintended or unauthorized application, that person or
persons shall indemnify and hold Sensored Life, and its officers, employees, affiliates, and distributors harmless against all claims, costs,
damages, expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of property damage, personal injury, death
or financial loss associated with such unintended or unauthorized use, even if such claim alleges that Sensored Life or its
affilitates/distributors was negligent regarding the design or manufacture or sales of the product in question.
The smart, simple and
cost-effective way to
remotely monitor and
alarm for temperature,
humidity, power and
more!
1 1