Advertisement
3-Wire Installation
(LMU 2840 Only)
STEP FOUR
Remove the protective cap from the pin
port on the telematics device.
STEP FIVE
Match up the notch and pins from connector
end of the cable with the port on the telematics device
to connect the Power Cable to the telematics device. (It
is easier to match up the cable with the device before the
device is mounted or secured.)
STEP SIX
Secure telematics device to a flat surface on exterior of the cab or trailer/equipment
with an unobstucted view to the sky. Additional hardware may be required.
CAUTION: ROPS (ROLLOVER PROTECTION STUCTURES) FOPS (FALLING OBJECT PROTECTIVE
STRUCTURES) CANNOT BE DRILLED INTO OR CUT INTO AS IT MAY WEAKEN THE STRUCTURES
ABILITY TO PERFORM ITS INTENDED FUNCTION. THE ROPS/FOPS SYSTEM INCLUDES THE
STRUCTURE, ITS MOUNTS TO THE MAIN FRAME AND THE MAIN FRAME ITSELF.
PedigreeTechnologies.com | Support: (701)-499-0022
match notches
4
Mobile Equipment Manager
(TTU2830/TTU2840)
Advertisement
