Bradford White BWCADAPTER User Manual page 9

○ Open the Bradford White Connect App and log in using your email and password. To sign
up, click the Homeowner sign up in the bottom left corner of the screen and follow the
on-screen instructions. Once logged in, begin the pairing process by clicking Add Water
Heater and following the on-screen instructions.
○ To Discover the Adapter, first hold the action button on the Adapter for 3 seconds. This
will begin the Bluetooth pairing mode, indicated by a flashing blue LED light on the
Adapter. Your Adapter will now be discoverable by your mobile device.
○ Select the Adapter from the Discover screen, the mobile device will prompt you for a 4
digit code. Plug in the last four digits of your Adapter's serial number, which can be
found on the front label of the Adapter. This step is for multifactor authentication and is
for security purposes.
○ Once your Adapter and mobile device are connected via Bluetooth, your mobile device
will prompt you to select a local wireless network. Select the network of your choosing
and enter the password using your mobile device.
○ If your Adapter is successfully able to connect to the wireless network, you will see this
screen. If empty, type in the serial number of the water heater or click the box to scan
the barcode on the side of the heater. If your installing contractor uses the Bradford
White Connect App, this step may already be complete. Click next on the
Congratulations page to complete the installation.
Control & Monitor
○ The system allows the user to control the heater's temperature from the mobile
application using iOS or Android mobile phone. The user can also monitor the energy
consumed by the heater using the mobile application.
Alert
○ The system will alert the homeowner about any fault that the heater encounters and
using the mobile application, the homeowner can contact the contractor and can get
the heater fixed.
Rev 3.0.|27-Aug-20
Bradford White - Confidential
BWCADAPTER
Page 9 of 23