Download Print this page

TE Connectivity AMP NETCONNECT A-BUS Multi-Room Audio System Instruction Sheet

Advertisement

Quick Links

.
Volume Control Module
Punchdown Wire Order
Brown Blue Green Orange
Distribution Hub
Power Module (1479392-1)
Speakers ............... Drives one pair of speakers (4-8 ohms)
Control................... Rotary
Wall Plate .............. Designed to fit DecoraTM style wall plates
Terminals ............... Input: 110 Punchdown
Output: Screw terminal (up to 14 gauge)
IR........................... None
Size ....................... Depth 70 mm [2.8 In.] Height 107 mm [4.2 In.]
Width 44 mm [1.7 In.]
Power Module (1479393-1)
Infrared .................. Repeating 38 KHz and 56 KHz
Nominal Range...... In sunlight < 5 M [15 ft], Indoors > 20 M [60 ft]
Talkback ................ Status flashed green when in use
Emitters ................. Four max. from Interface Module
Status .................... (System ON) - constant red
Interface Module (1479395-1)
Inputs..................... Audio - phone sockets (1 pair)
Status - 2.1 mm DC (+V center)
Outputs.................. Infrared - 3x3.5 mm TRS jacks; to Hub - RJ-45
Size ....................... Length 100 mm [4 In.] Width 71 mm [2.8 In.]
Height 32 mm [1.3 In.]
AMP NETCONNECT logo is a trademark of TE Connectivity.
©2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company
All Rights Reserved
*Trademark
TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
AMP NETCONNECT*
A-BUS™ Multi-Room
Audio System
A-BUS AUDIO SYSTEM DIAGRAM
Cat 5e Connectivity Panel
FEATURES AND SPECIFICATIONS
To obtain information on AMP NETCONNECT products, call PRODUCT INFORMATION at the number
at the bottom of this page or visit the AMP NETCONNECT website at www.ampnetconnect.com.
TOOLING ASSISTANCE CENTER 1-800-722-1111
PRODUCT INFORMATION 1-800-522-6752
Local Input Module
Local Input Module (1479396-1)
Inputs .................... Audio - RCA Phono Sockets (1 pair)
from hub - 110 punchdown
Output ................... To power module - 110 punchdown
Size ....................... Depth 25 mm [1.8 In.) Height 107 mm [4.2 In.]
.............................. Width 44 mm [1.7 In.]
HUB (1479534-1)
Inputs .................... From Interface Module - RJ-45
Power - 2.5 mm DC (+V center)
Outputs.................. To rooms (zones) RJ-45, Expansion port - RJ-45
RJ-45..................... Wiring format - 568A
Size ....................... Length 117 mm [4.62 In.] Width 70 mm [2.75 In.]
Height 19 mm [.75 In.]
Cable
Cable..................... Interface module to hub; hub to power modules
Category 5 (or equivalent)
Power Module to speakers (14 awg recommended)
Power Supply (PS-40)
Inputs .................... 108 - 264 Vac
Output ................... 4 Amp
Size ....................... Length 150 mm [5.9 In.] Height 36 mm [1.4 In.]
Width 70 mm [2.7 In.]
This controlled document is subject to change.
For latest revision and Regional Customer Service,
visit our website at www.te.com
Instruction Sheet
408-8880
31 AUG 11 Rev A
4-BUS Ready AMP
Traditional System
System Interface Module
1 of 3
LOC B

Advertisement

loading
Need help?

Need help?

Do you have a question about the AMP NETCONNECT A-BUS Multi-Room Audio System and is the answer not in the manual?

Questions and answers

Summary of Contents for TE Connectivity AMP NETCONNECT A-BUS Multi-Room Audio System

  • Page 1 PRODUCT INFORMATION 1-800-522-6752 For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com LOC B TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners.
  • Page 2 408-8880 1. INTRODUCTION B. Interface Module (1479395-1) The A-BUS audio system is to be combined with your If the amplifier is not equipped with an A-BUS/Ready source equipment (receiver, CD player, etc.) and output, an interface module should be located near the speakers.
  • Page 3 408-8880 5. PRODUCT INSTALLATION There are also situations where the output level should be limited. The main volume control of the Pre-Wiring: All cabling between the ready amplifier/ system should be set to about 2 o'clock. The trim pots interface module and the distribution hub should be should then be adjusted to a point, just below the Cat 5 cable or better (eg.