Page 4
Contact us: support@turbro.com www.turbro.com This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug.
Page 5
Contact us: support@turbro.com www.turbro.com You may run the power cord out of the framed wall opening to an existing outlet or install an outlet on a nearby wall stud within the wall. In order to use the power safely, please make sure: NEVER use the relocatable power tap/outlet/power strip.
Contact us: support@turbro.com www.turbro.com SPECIFICATIONS Power Supply 110-120V / 60Hz Rated Current 13.6A Rated Power 1500W / 5280BTU Adjustable Thermostat F- 82 Heating Area 400 - 1000sq.ft Heating Element 100% infrared quartz tube Noise Level (dBA) ≤ 42dBA Timer 30min - 6hours...
Page 8
Contact us: support@turbro.com www.turbro.com RECESS INTO A WALL Prepare the opening and outlet. Place the unit into the framed opening gently and no fixing brackets are needed. Opening sizes ranges (mm) Model Width Height Depth(min) Depth(suggest) IFN22 580-610 450-460 IFN26...
Contact us: support@turbro.com www.turbro.com USING THE CONTROL PANEL Flame Control Digital Display Power Button Timer Setting Thermostat Control The buttons on the control panel and the remote control function in the same way. POWER BUTTON Press the power button once to power on.
Obstruction of the rear air intakes or front grill may result in overheating. If this occurs, please disconnect the heater from the power socket and allow it to cool for 10-15 minutes before powering it on again. Should problems persist, please contact TURBRO Customer Service Team via support@turbro.com.
Need help?
Do you have a question about the In Flames INF23 and is the answer not in the manual?
Questions and answers