Advertisement
4. MAINTENANCE & INSPECTION
NOTE: Only fully qualified personnel should attempt to carry out maintenance, or repair, on the pulley block.
4.1.
Keep the pulley block clean and regularly lubricate the hook shank.
4.2.
Carry out a visual inspection every time the pulley block is used and listen for any unusual sounds during operation.
WARNING! The pulley block should be disassembled, cleaned, inspected, reassembled and tested by an Authorised Service Agent annually,
p
p
or more frequently if used outside, exposed to the weather.
4.3.
Depending upon the frequency of use and local conditions, the load rope will eventually show signs of wear. When it does, it should be replaced immediately.
4.4.
Overloading, or incorrect hooking, may distort the hook and increase the hook opening. If this occurs replace the hook immediately.
4.5.
Inspect the hook for flaws, cracks, distortion, wear and freedom of rotation.
4.6.
Regularly inspect the pulley wheel for wear.
5. APPLICATIONS AND SAFE WORKING LOADS
IMPORTANT: WHEN USED AS A SIMPLE LIFTING PULLEY (A) THE MAXIMUM LOAD IS LIMITED TO THE SAFE WORKING LOAD (SWL)/ROPE PART.
WHEN USED AS PART OF A TWO-PULLEY SYSTEM (B) THE MAXIMUM LOAD IS LIMITED TO THE BLOCK SWL.
NOTE: This pulley cannot be used as the upper pulley in a two-pulley system.
5.1.
Applications, based on PB1000, are shown below.
Declaration of Conformity
We, the sole importer into the UK, declare that the products listed here are in conformity with the following standards and directives. The construction files
for these products are held by the Manufacturer and may be inspected, by a national authority, upon request to Jack Sealey Ltd.
PULLEY BLOCK
Models: PB1000, PB2000, PB3000
EN 13157: 2003
98/37/EC Machinery Directive
93/68/EEC Marking Directive
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
01284 757500
Pulley
PB1000
PB2000
PB3000
Signed by Mark Sweetman
Sole U.K. Distributor,
Sealey Group,
Bury St. Edmunds, Suffolk.
01284 703534
Block SWL
SWL/Rope Part
1000 kg
2000 kg
3000 kg
8th December 2005
www.sealey.co.uk
PB1000, PB2000, PB3000 - 1 - 081205
500 kg
1000 kg
1500 kg
Advertisement
