Living 088-2073-6 Quick Start Manual page 4

6
Model No. 088-2073-6
BEFORE YOU START ASSEMBLY, FIRST LOCATE WHERE YOU WILL PLACE
YOUR NEW UMBRELLA.
Step 1
Requires A, B
Place Upper Bracket (B) onto Lower Bracket (A) as shown.
Step 2
Requires C, AA, BB, CC
Line up the bolt holes on the Base Tube (C) with the corresponding bolt holes on the two
brackets. Screw M8X20mm Bolt (AA) on with Flat Washer (BB) and tighten it using Open
End Wrench (CC).
CC
B
A
C
AA
BB
Step 3
Requires C, D, DD
(1) Insert the stem of Sunshade (D) into the Base tube (C) on the assembled base.
(2) Screw in the Screw-in Knob (DD).
(3) Turn the Screw-in Knob (DD) until it is tightened completely.
Step 4
(1) Shake the umbrella fabric.
(2) Open the lock handle
(3) Then push lock handle up.
D
DD
7