Table of Contents
Summary of Contents for ABACO MACHINES AFJ25-B
- Page 1 ABACO MACHINES OPERATION MANUAL ABACO FORKLIFT BOOM (AFJ25-B) ABACO MACHINES (USA) 14508 S. Garfield Ave., Paramount, CA 90723, USA Tel : 310-532-0366 Fax : 310-532-0499 Email : sales@abacomachines.com Website : www.abacomachines.com...
- Page 2 OPERATION MANUAL APPLICABLE MODEL of this F ORKLIFT BOOM: AFJ25-B...
-
Page 3: Table Of Contents
INDEX Item Pages Equipment General Information......... 1 Technical Specifications..........1 1. Dimensions ............1 2. Work Load Limit............ 2 3. Spare part list............3 Safety Instructions............5 1. General Warnings, Cautions and Notes....5 2. Device usage............6 Appendix..............8 Technical problems &... -
Page 4: Equipment General Information
I. EQUIPMENT GENERAL INFORMATION: - Forklift Boom (AFJ25-B) is a forklift attachment. It is designed to lifting and moving goods, packages or other hanging purposes. - Forklift Boom is designed to fit various length articles by telescopic actions. - The boom can allow extending the boom length to 99 ⁄₄”... -
Page 5: Work Load Limit
2. Work Load Limit (W.L.L): W.L.L differs in accordance with the hook position. The more distance is the lesser W.L.L. Refer to the drawing below. Do not exceed the allowance specified W.L.L. 6160lbs 4620lbs 3080lbs (2800kg) (2100kg) 42 ” (1067mm) (1400kg) 1540lbs (700kg) -
Page 6: Spare Part List
3. SPARE PART LIST:... - Page 7 SPARE PART LIST POS. PART NUMBER DESCRIPTIONS QTY. AFJ25-B-01 Slide boom AFJ25-B-02 Snap pin 4 Ø AFJ25-B-03 Safety chain 6 x 165 Ø AFJ25-B-04 Washer 8 Ø Bolt M8 x 20 AFJ25-B-05 AFJ25-B-06 Main base AFJ25-B-07 Safety chain 6 x 660 Ø...
-
Page 8: Safety Instructions
III. SAFETY INSTRUCTIONS: 1 General Warnings, Cautions and Notes: a. Before Operations: - Ensure that the safety chain is in good shape and in conditions as no crack, no excessive wear, heavy rust, or any damage and hooked securely to the forklift mast. Check to confirm all the welded joints are free from any defect or damage (e.g. -
Page 9: Device Usage
2. Device usage: Step 1: Adjust the length of the Boom Depending on the demand, adjust the reach of the forklift boom as follows: - Release the snap pin and pin as 1 & 2 - Pull the slide boom out to the desired length ( Figure 1.1 aiming the holes of the main base to match that of the slide boom. - Page 10 Step 2: Install Forklift Boom to a forklift. Confirm two forks of the forklift are firmly and securely inserted to the main base, then lock the main base to the forklift mast by a safety chain (Figure 1.2). Install the safety chain to the forklift mast for security Figure 1.2 Step 3: Hook the Bow shackle into the pad of Forklift Boom...
-
Page 11: Appendix
IV. APPENDIX: See how to calculate to choose the forklift truck and the proper distance from forklift as below: Method: Forklift truck’s Load Choose a forklift truck in according to Capacity Specs. the user’s demands. Rated Load To prevent the forklift truck overturning, the Momen Capacity(tons) user must calculate to ensure Moment a of the... -
Page 12: Technical Problems & Solutions
V. TECHNICAL PROBLEMS & SOLUTIONS: Technical Cause Solution Problems Lubricate oil into It’s hard to pull sliding part and Dust and/or rust. the slide boom regularly clean it. VI. INSPECTION & MAINTENANCE: - Operator is responsible to check the equipment regularly, not limited to check the safety chain and pins, to ensure the equipment is in good operating conditions. -
Page 13: Warranty Policy
VII. WARRANTY POLICY: At the time of delivery, it is necessary to inspect the Forklift Boom (AFJ25-B) to make sure that it has not been damaged during shipment. The product at the time of dispatch is warranted to be free of defects in material or workmanship. -
Page 14: Warranty Certificate
WARRANTY CERTIFICATE You are kindly requested to read the following carefully. PERIOD The warranty starts from the date of purchase (date on distributor’s invoice). Warranty is valid for a period of twelve (12) months WARRANTY This warranty is limited only to provide replacements of the parts recognized by the Company as defective (excluding worn- outs and consumables.) The Company is not responsible for any misuse or abuse of the... - Page 15 THIS MANUAL SHALL BE REVISED WITHOUT PRIOR NOTICE FOR IMPROVEMENT PURPOSES All Rights Reserved: DO NOT COPY AND/OR QUOTE THE CONTENTS WITHOUT PRIOR WRITTEN CONSENTS.