German pool UTS-001 User Manual

UV-C
LED
TOOTHBRUSH SANITIZER
UTS-001
USER MANUAL
Please read these instructions and warranty information
carefully before use and keep them handy for future reference.
SAFETY INSTRUCTIONS
1. Make sure the power adapter output voltage
is 5V/DC, standard power adapter, 5V/DC>1A.
2. Do not dismantle this product or immerse it
in water to avoid the occurrence of failures.
3. If product is dirty, wipe clean with wet
tissue or towel wetted with a few drops of
purified water. Do not pour water onto
product as it may damage the circuit board.
WARNING!
DO NOT look at UV-C LED directly when
the product is operating as it may be
damaging to your eyes.
PRODUCT STRUCTURE
Cover USB
LED
Interface
Indicator Light
Control
Switch
UV-C LED
Toothbrush
Positioning
Mouth
Drain / Ventilation
OPERATING INSTRUCTIONS
To Charge
1. When charging with USB, the LED indicator
light will blink red, indicating the product is
charging. When fully charged (approx.2 hrs),
LED indicator light will light up constant in red.
2. When product is operating, the LED
indicator light will light up constant in blue.
To Use
1. Open cover. Place toothbrush head facing
the UV tube, and wedge toothbrush neck
into the silicone holder.
2. Close cover. Product will automatically start
to operate. Sanitization cycle will be
completed after 5 minutes, after which the
product will automatically turn off.
TECHNICAL SPECIFICATION
Model No. UTS-001
Voltage: 5V
UV Power 0.3W
UV Wavelength: UV-C: 270-285nm
UV-A: 320-400nm
Product Dimension (H) 77 (W) 55 (D) 30 mm
Net Weight 50g
Specifications are subject to change without prior
notice.
If there is any inconsistency or ambiguity between
the English version and the Chinese version, the
Chinese version shall prevail.
Refer to www.germanpool.com for the most
up-to-date version of the Operating Instructions.
UTS-001_M_20(2)