Advertisement
10.
When not in use, unplug and empty the air cooler and wrap the power
cord for safety storage
Operating Instructions
1.
Before filling the air cooler make sure the unit is unplugged
2.
Open the water inlet and fill the water reservoir with cold, clean water.
Before doing so ensure the rubber plug is located correctly
3.
Do not use hot water and never add chemicals or solutions to the
water
4.
Fill the reservoir only to the water line indicator to avoid overfilling
5.
After filling, close the water inlet securely. Use care when transporting
filled air cooler
6.
Place the water-filled air cooler on a firm, flat and level surface. To
safeguard fine wood finishes place a protective covering between the
air cooler and surface
7.
Plug air cooler into socket outlet and switch on the machine. Do not
plug in the air cooler with wet hands
8.
The water will last between 22 and 24 hours – check water level
periodically
9.
Do not block the suction and exhaust openings. If they are blocked it
will affect not only the operational effectiveness but also the normal
operation of the machine
10.
Never lift the lid off the water inlet violently as damage to the hinges
will occur
11.
If the water reservoir is over-filled remove rubber plug and discharge
water from the container
12.
The air cooler produces cooler airflow if the frozen cooler blocks are
placed in the water reservoir
Cleaning
1.
Never immerse the power cord in water as electric shock may occur as
a result
2.
Periodic cleaning is required for proper operational effectiveness of the
unit
3.
Tap water may contain impurities or dissolved solids that could leave a
residue and deposit upon the inner surface of the water tank and
promote the growth of algae or bacteria. It is recommended that you
clean this air cooler often in areas where the tap water is poorer. More
frequent cleaning may be necessary where you see a heavy build-up of
impurities or notice the presence of an unpleasant odour. Never use
abrasive cleaners when cleaning this unit
To clean the air cooler use the following steps:
1.
Unplug the air cooler
2.
Remove the filter and wash it under running water
3.
Empty the water tank, remove the rear casing and wash the water
reservoir tank with mild soap detergent.
Advertisement
