Page 5
Step 2 -- Attach ground fixtures to Base Option1: Preassembled into base 1 / 2 / 5 / 6 Option 2:If no water tank, go ahead this step...
Page 6
Insert the fastening piece through the hole on the tabletop. Hold the tabletop using your hand and screw the fastening piece to the plastic connector M6xM12 counter-clockwise,using the other hand. Tighten the fastening piece.Screw the plastic nut to the plastic connector counter-clockwise.Tighten the plastic nut.
Page 7
assembly. Slide two reflector panels together. leave loose. as above.