Somatik Labs SLS-IRCT30 Frequently Asked Questions

Infrared Contactless Thermometer
FREQUENTLY ASKED QUESTIONS
1. What is the best method for taking a temperature with the SLS-IRCT30?
Please ensure you follow the recommended temperature testing distance, testing the subject
or object at 1-5 cm distance. As a guide, pull the trigger at 5cm and move closer to the forehead
until you get a reading. For optimal accuracy, a closer range will provide a more accurate reading.
2. What does a reading of "Lo" mean?
If the SLS-IRCT30 gives a reading of "Lo" it is still providing a clear reading, this indicates that
the subject's forehead is cold. As this reading is not above the fever range there is no cause for
concern.
For optimal accuracy, a closer range will provide a more accurate reading. For best results, please
take measurements under an ambient temperature between 10°C and 40°C.
3. What is the correct setting for taking accurate temperature measurements for people?
When testing forehead temperatures, please ensure you use the "Forehead Temperature" mode
which is accessed with the middle "Mode"
When taking the forehead temperature, point the IR sensor to the centre of the forehead.
Move the thermometer towards the forehead. The distance between the thermometer and
the forehead must be 1-5 cm (½" to 2"). Pull the Trigger button and release when a reading is
displayed. The forehead temperature will be displayed on the screen.
Please ensure the forehead has no sweat and no hairs covered before measuring the forehead
temperature; otherwise, the result could be incorrect.
4. What is the correct setting for taking accurate temperature measurements for objects?
When testing object temperatures, please use the "Object Temperature"
When taking the object temperature, Point the IR sensor to the centre of the object. The distance
between the thermometer and the object must be 1-5 cm (½" to 2"). Press and release the
Trigger button. The object temperature will be displayed on the screen.
5. How do I switch between "Forehead Temperature" and "Object Temperature" mode?
In a power-on state, press the "Mode"
"Object temperature" mode. The icon will switch between a human profile icon
as the "Mode"
icon
symbol indicates the Body Temperature mode. The
The
Temperature mode.
6. What is a "normal" reading?
When the temperature reading is between 34.9°C and 37.5°C, there will be a long beep and a
green backlight which indicates normal temperature reading.
When the temperature reading is between 37.6°Cand 42.2°C, there will be 3 short double beeps
and a red backlight. This indicates that the body temperature is a little high and you may have a
fever. Please consult your doctor if you are not sure.
www.directed.com.au | www.directed.co.nz
All Images, Information and Content are Copyright © 2020 Directed. All Rights Reserved.
button to switch between "Forehead Temperature" and
button is pressed.
button.
symbol indicates the Object
Model:
SLS-IRCT30
mode.
and a house
www.somatiklabs.com