Troubleshooting & Service Tips - Philips PET320 Service Manual

5. TROUBLESHOOTING & SERVICE TIPS
5.1 Procedure to change region code
1. Open DVD Door
2. Press and hold the OSD key together with the POWER ON ( II) key for about 4sec
to enter CONFINGURATION SETUP menu
3. Press the UP and DOWN ( ▼) key to enter REGION on menu
Version : 1.00
REGION
AGING SETTING
DEFAULT
4. Press the NEXT (
5. Press the UP and DOWN ( ▼) key to select number of 1 to 6
6. Press the OK key to save the selection.
Note : Once press OK, data with new REGION NO. will be stored into EEPROM and
replace the old one.
7. Switch off and re-switch on the product
8. Verify Region code change done
|) key to select REGION NO.
Region Code
1
2
3
4
5
6
Region
USA
EUROPE
ASIA PACIFIC
AUSTRALIA, NEW ZEALAND, LATAM
RUSSIA, INDIA
CHINA