Chapter 1: Introduction Precautions ..............................Product ................................ Power and Plug ............................Power Cord and Signal Cable ........................Use Environment ............................Cleaning ..............................Remote Control Functions........................... Buttons on the TV............................Switching the TV on and off ......................... Sockets ............................... Chapter 2: Connections and Setup Switching on ...............................
Chapter 1 Precautions Use Environment Read all of the instructions before operating the set. Do not place the set on an unstable cart, stand, or table. Keep these instructions well for future use. Product Place the set on a place that allows good ventilation. Do not block or cover the ventilation openings on the Do not use the set near damp, and cold areas.
Introduction Remote Control Functions Most of your television's functions are available via the menus that appear on the screen. The remote control(s) supplied with your set can be used to navigate through the menus and to configure all the general settings. Notes: (POWER ) Turns the TV on or off.
Page 7
Introduction SLEEP Set the TV to turn off after a given amount of time. Toggles the Electronic Program Guide on or off under DTV source. GUIDE Brings up your favorite channel list. CH LIST Displays the channel list menu. Colored buttons (Red/Green/Yellow/Blue) Performs the corresponding function indicated at the bottom of the screen.
Turns the TV on or standby. With the TV on, press this button to display the menu for source selection. With the TV on,press and hold this button for three (3) seconds to display the navigation menu(Home menu/ Menu off / Setting menu / Source menu / TV turn off) . In order to turn the TV off , select "TV turn off "...
Sockets USB sockets (input) These sockets can be used to connect an USB device. Optical Connector DIGITAL AUDIO OUT This output can be used to connect a compatible digital audio receiver. Video AV IN sockets (input) The AV IN sockets can be used to connect a range of equipment, including video AV IN recorders, camcorders, decoders, satellite receivers, DVD players, or games Audio...
Chapter 2 Connections and Setup Switching on Follow the instructions on this page on how to switch on your TV set and the remote control before going on to following pages describing how to use the channel set-up procedure. 1. Insert two batteries in the remote control. Precautions on using batteries: - Only use the battery types specified.
Connections and Setup Network Connection To access the Internet, you must subscribe to high speed broadband Internet service with your Internet service provider (ISP). Your TV can be connected to your home network in two ways: • Wired, using the RJ45 (LAN) connector on the back panel. •...
Chapter 3 Menu Function Micro Dimming Selects On or Off to turn on/off micro dimming. You can press the button to enter the Settings Menu. The Settings Menu consists of the following settings: Advanced Settings Selects more picture advanced settings. •...
System EPG is an on-screen guide that displays scheduled Menu language TV programmes. You can navigate, select, view and Chooses the on-screen display language. programmes. Timer Channel organizer Enter the submenu to adjust the options below. This option allows you to skip channels. -Time zone Selects the local time zone.
-CC mode This option allows you to choose the way closed captioning information appears on the screen. ・Off -No captioning information displayed. ・On –Chooses this option if you want captioning information to be shown whenever available. ・On When Muted – This option allows the closed captioning to display (when available) whenever the TV’s sound is muted.
Chapter 4 Attention and Frequently Asked Questions Attention: Some non-standard mobile storage device may not be recognized. Please change to use the standard device. Note: For coding files, there are many kinds non- standard coding method, so this system can not be guaranteed to support the file formats using any coding method.
Troubleshooting Ignition Most problems you encounter with your TV can be Black spots or horizontal streaks appear, or the picture corrected by consulting the following troubleshooting list. flutters or drifts. This is usually caused by interference from car ignition system, neon lamps, electric drills, or No picture, no sound other electrical appliance.
- This Quasar TV is compatible with a 100 mm x 200 mm mounting hole pattern. - 4 pcs of type M4 screws are required for installing the wall mount bracket to your Quasar TV. Do not use screws that are longer than 8mm. Screws that are too long may cause damage to the inside of the TV set.
Other Information Q40FST2 Specifications 39.5 inches 1920 x 1080 ATSC Digital system and NTSC Analog NTSC-M system Cable: 1-135 5 W x 2 Digital Audio (Optical) Analog Audio Line Out 70 W 120 V, 60 Hz...
Page 19
Quasar is a registered trademark of Panasonic Corporation of North America in the U.S. and Canada, and Panasonic Corporation in other countries. All rights reserved. This product is manufactured under license by VARIETY PRODUCTS, LLC. Any Liability to Quasar television products, including design and quality, is the sole responsibility of VARIETY PRODUCTS, LLC.